December 13, 2019

How To Clean Cement Stain On A Ceramic Floor

Many do not yet know how to clean the dried cement stains on the ceramic floor. The cement that dries on the ceramic floor is often a problem for many people. Because it is very difficult to clean. Cement stains on the floor can make ceramics rough and uncomfortable when stepped on. In addition, it can also reduce its beauty. Tile Cleaning Northern Beaches can help solve your problem with dirt stuck to the tiles in your home. However, if you want to try cleaning it yourself at home, here are some ways and materials that you can use to clean the ceramic floor from dried cement stains find this.

1. Using Mops and Brooms
Remnants of cement just stuck to the floor can be easily cleaned using water and a mop. If indeed it has begun to harden and can use the help of a broom to rub it clean. How to clean the remaining cement on the ceramic floor must be done as soon as possible. Do not let the cement dry out because it will become difficult to clean.

2. Clean the Ceramic Floor with Vinegar Solution
Vinegar solution has a good ability to remove stains on the ceramic floor. So the dried cement dirt can be cleaned using the vinegar solution. The use of vinegar can be very effective in dealing with the remnants of cement that has dried up on the ceramic floor.

How to clean cement dirt on the ceramic floor using vinegar is also very easy. You just need to pour vinegar into the ceramic parts that have dried cement in the dirt. Allow the vinegar for a few moments to allow interaction between the solution and the cement. If you feel the cement has begun to peel or lift immediately rinse or clean using a mop and broom.

3. Coconut pulp
Coconut dregs can apparently be used to clean grout stains on ceramic floors. Coconut pulp that is used is the remainder of the manufacture of coconut milk. Its use can be done on new and old ceramics. In addition to cleaning, coconut pulp can make ceramics always look shiny.

4. Hydrochloric Acid or HCL
The way is easy, the HCL solution is put into a bucket that has been filled with water. Don’t add too much hydrochloric acid, preferably only a few tablespoons. If it is too much, it is feared the solution will become too acidic and can damage the grout.

Use a small brush to apply the HCL liquid to the part where the cement stain dries. For maximum results, leave it for a few moments and then clean it by rubbing with a brush or coconut fiber.

Fresh & Healthy Carpet Cleaning Northern Beaches
7 Grosvenor Pl, Brookvale NSW 2100
(02) 8311 067

Steven D Lawson

Steven D Lawson